Applying And Modifying Admin Flow; Class Creation - SMC Networks 7824M/VSW - annexe 1 Manual

CLI
7.6.6.3
i
7.6.6.4
194
To delete a specified packet-classifying pattern, use the following command.
Command
no ip
no ip header-length

Applying and modifying Admin Flow

After configuring an admin flow using the above commands, apply it to the system with
the following command. If you do not apply it to the system, all specified configurations
from Admin-Flow Configuration mode will be lost.
To save and apply an admin flow, use the following command.
Command
apply
To modify an admin flow, use the following command.
Command
flow admin NAME modify
You should save and apply the admin flow to system using apply command whenever
you modify any configuration of the admin flow.

Class Creation

One class can include several flows. You can simply handle and configure the packets on
several flows at once.
To create a class including more than 2 flows, use the following command.
Command
class admin NAME flow FLOW1
[FLOW2] [FLOW3]
To delete configured admin class or all admin classes, use the following command.
Command
no class admin all
no class admin NAME
no class admin NAME flow
FLOW1 [FLOW2] [FLOW3]
Mode
Deletes a specified packet-classifying pattern for each
Admin-Flow
option.
Mode
Admin-Flow Applies an admin flow to the system.
Mode
Global Modifies a flow, enter an admin flow name.
Mode
Creates an admin class including at least 2 admin
flows.
Global
NAME: admin class name
FLOW: admin flow name
Mode
Deletes all admin classes.
Deletes specified admin class.
NAME: admin class name
Global
Removes specified admin flows from class.
NAME: admin class name
FLOW: admin flow name
Management Guide
TigerAccess™ EE
Description
Description
Description
Description
Description
SMC7824M/VSW