CLI
8.1.7
8.1.8
240
To display a specified VLAN description, use the following command.
Command
show vlan description
VLAN Precedence
To make precedence between MAC address and Subnet based VLAN, you can choose
one of both with below command.
Command
vlan precedence {mac | subnet}
Displaying VLAN Information
User can display the VLAN information about Port based VLAN, Protocol based VLAN,
MAC based VLAN, Subnet based VLAN and QinQ.
Command
show vlan
show vlan VLANS
show vlan description
show vlan dot1q-tunnel
show vlan protocol
show vlan macbase
show vlan subnet
Mode
Enable
Global
Shows a specified VLAN description.
Bridge
Mode
Configure precedence between MAC based VLAN and
Bridge
Subnet based VLAN.
Mode
Shows all VLAN configurations.
Shows a configuration for specific VLAN.
Shows a description for specific VLAN.
Enable
Global
Shows QinQ configuration.
Bridge
Shows VLAN based on protocol.
Shows VLAN based on MAC address.
Shows VLAN based on subnet.
Management Guide
TigerAccess™ EE
Description
Description
Description
SMC7824M/VSW