Admin Policy Priority; Admin Policy Action - SMC Networks 7824M/VSW - annexe 1 Manual

CLI
7.6.7.2
7.6.7.3
196
To remove flow or class from the policy, use the following command.
Command
no include-flow
no include-class

Admin Policy Priority

If rules that are more than two match the same packet then the rule having a higher prior-
ity will be processed first.
To set a priority for an admin access rule, use the following command.
Command
priority {highest | high | medium|
low}

Admin Policy Action

To specify the rule action (action match) for the packets matching configured classifying
patterns, use the following command.
Command
action match deny
action match permit
To delete a specified rule action(action match), use the following command.
Command
no action match deny
no action match permit
To specify a rule action (no-action match) for the packets not matching configured clas-
sifying patterns, use the following command.
Command
no-action match deny
no-action match permit
To delete a specified rule action(no-action match), use the following command.
Command
no no-action match deny
no no-action match permit
Mode
Removes the admin flow from this policy.
Admin-
Policy
Removes the admin class from this policy.
Mode
Admin- Sets a priority for an admin policy.
Policy (default: medium)
Mode
Denies a packet.
Admin-
Policy
Permits a packet.
Mode
Admin-
Deletes a specified rule action.
Policy
Mode
Denies a packet.
Admin-
Policy
Permits a packet.
Mode
Admin-
Deletes a specified rule action.
Policy
Management Guide
TigerAccess™ EE
Description
Description
Description
Description
Description
Description
SMC7824M/VSW