Management Guide
TigerAccess™ EE
i
SMC7824M/VSW
Tab. 7.2
shows the result of mask calculation of default value.
Type
ICMP_ECHOREPLY (0)
ICMP_DEST_UNREACH (3)
ICMP_SOURCE_QUENCH (4)
ICMP_REDIRECT (5)
ICMP_ECHO (8)
ICMP_TIME_EXCEEDED (11)
ICMP_PARAMETERPROB (12)
ICMP_TIMESTAMP (13)
ICMP_TIMESTAMPREPLY (14)
ICMP_INFO_REQUEST (15)
ICMP_INFO_REPLY (16)
ICMP_ADDRESS (17)
ICMP_ADDRESSREPLY (18)
Tab. 7.2
Mask Calculation of Default Value
To configure the limited ICMP transmission time, use the following command.
Command
ip icmp interval rate-limit IN-
TERVAL
The default ICMP interval is 1 second (100 ms).
To return to default ICMP configuration, use the following command.
Command
ip icmp interval default
To display ICMP interval configuration, use the following command.
Command
show ip icmp interval
Status
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
Mode
Configures a limited ICMP transmission time.
Global
INTERVAL: 0-2000000000 (unit: 10 ms)
Mode
Global
Returns to default configuration.
Mode
Enable
Global
Shows ICMP interval configuration.
Bridge
Description
Description
Description
CLI
225