Displaying Snmp Alarm Severity; Displaying Snmp Configuration; Disabling Snmp - SMC Networks 7824M/VSW - annexe 1 Manual

CLI
7.1.9.8
7.1.10
7.1.11
!
148
To delete configured severity of alarm for STP guard, use the following command.
Command
no snmp alarm-severity stp-
bpdu-guard
no snmp alarm-severity stp-
root-guard

Displaying SNMP Alarm Severity

To display configured severity of alarm, use the following command.
Command
show snmp alarm-severity

Displaying SNMP Configuration

To display all configurations of SNMP, use the following command.
Command
show snmp
To deletes a recorded alarm in the system, use the following command.
Command
snmp clear alarm-history

Disabling SNMP

To disable SNMP, use the following command.
Command
no snmp
When you use the no snmp command, all configurations of SNMP will be lost.
Mode
Global Deletes configured severity of an alarm for STP guard.
Mode
Enable
Global Shows configured severity of alarm.
Bridge
Mode
Enable
Global Shows all configurations of SNMP.
Bridge
Mode
Global Deletes a recorded alarm in the system.
Mode
Global Disables SNMP.
Management Guide
TigerAccess™ EE
Description
Description
Description
Description
Description
SMC7824M/VSW