Radius Server; Radius Server For System Authentication; Radius Server Priority; Timeout Of Authentication Request - SMC Networks 7824M/VSW - annexe 1 Manual

CLI
4.2.4
4.2.4.1
i
4.2.4.2
4.2.4.3
4.2.4.4
48

RADIUS Server

RADIUS Server for System Authentication

To add/delete a RADIUS server for system authentication, use the following command.
Command
login radius server A.B.C.D
KEY [auth_port PORT acct_port
PORT]
no login radius server [A.B.C.D]
You can add up to 5 RADIUS servers.

RADIUS Server Priority

To specify the priority of a registered RADIUS server, use the following command.
Command
login radius server
A.B.C.D <1-5>

Timeout of Authentication Request

After an authentication request, the switch waits for a response from a RADIUS server for
specified time. To specify a timeout value, use the following command.
Command
login radius timeout <1-100>
no login radius timeout

Frequency of Retransmit

In case of no response from a RADIUS server, the switch is supposed to retransmit an
authentication request. To set the frequency of retransmitting an authentication request,
use the following command.
Command
login radius retransmit <1-10>
no login radius retransmit
Mode
Adds a RADIUS server with its information.
A.B.C.D: IP address
KEY: authentication key value
Global
auth_port: authentication port (optional)
acct_port: accounting port (optional)
Deletes an added RADIUS server.
Mode
Specifies a priority of RADIUS server.
move
Global A.B.C.D: IP address
1-5: priority of RADIUS server
Mode
Specifies a timeout value.
1-100: timeout value for a response (default: 5)
Global
Deletes a specified timeout value.
Mode
Sets the frequency of retransmit.
1-10: frequency count (default: 3)
Global
Deletes a specified frequency count.
Management Guide
TigerAccess™ EE
Description
Description
Description
Description
SMC7824M/VSW