Policy Priority; Policy Action; Marking And Remarking - SMC Networks 7824M/VSW - annexe 1 Manual

Management Guide
TigerAccess™ EE
7.6.4.3
7.6.4.4
!
7.6.4.5
SMC7824M/VSW

Policy Priority

If rules that are more than two match the same packet then the rule having a higher prior-
ity will be processed first. To set a priority for a policy, use the following command.
Command
priority {low | medium | high |
highest}

Policy Action

To specify the rule action for the packets matching configured classifying patterns, use the
following command.
Command
action match deny
action match permit
action match redirect
VLANS port PORTS
action match mirror
action match vlan VLANS
action match copy-to-cpu
action match route next-hop
A.B.C.D
In this switch, redirect command cannot be configured when MAC filtering function is
running in the system.
To delete a specified rule action, use the following command.
Command
no action match deny
no action match permit
no action match redirect
no action match mirror
no action match vlan
no action match copy-to-cpu
no action match route next-hop

Marking and Remarking

This switch can use CoS values of packet marking or remarking to support QoS feature.
Packet marking allows you to partition your network into multiple priority levels or classes
Mode
Policy Sets a priority for a policy. (default: medium)
Mode
Denies the classified packets.
Permits the classified packets.
Redirects the classified packets to specified port.
vlan
VLANS: VLAN ID (1-4094)
PORTS: port number
Sends a copy of classified packets to mirror monitoring
Policy
port.
Specifies a VLAN ID of classified packets.
VLANS: VLAN ID (1-4094)
Sends classified packets to CPU.
Specifies next-hop address of classified packets.
A.B.C.D:
Mode
Policy Deletes a specified rule action.
Description
Description
Description
CLI
185