Table of Contents
Advertisement
Management Guide
TigerAccess™ EE
3 Command Line Interface (CLI)
3.1
SMC7824M/VSW
The switch enables system administrators to manage the switch by providing the com-
mand line interface (CLI). This user-friendly CLI provides you with a more convenient
management environment.
To manage the system with the CLI, a management network environment is required. The
switch can connect to the management network either directly (outband) or through the
access network (inband). It can even connect using a combination of the two; for example,
a cascaded switch connects inband to the cascading switch, and then from the cascading
switch to the management network through the outband interface.
The switch also provides the RS232 console interface to simply access the system with a
provided RJ45-to-DB9 cable.
This chapter describes a basic instruction for using the command line interface (CLI)
which is used for managing the system.
Configuration Mode
•
Configuration Mode Overview
•
Useful Tips
•
Configuration Mode
You can configure and manage the switch with the CLI via a management network envi-
ronment or the console interface.
The CLI provides the following command modes:
•
Privileged EXEC View Mode
Privileged EXEC Enable Mode
•
Global Configuration Mode
•
Bridge Configuration Mode
•
DHCP Pool Configuration Mode
•
DHCP Option 82 Configuration Mode
•
Interface Configuration Mode
•
Rule Configuration Mode
•
•
RMON Configuration Mode
CLI
25
Advertisement
Table of Contents
