Source/Receiver Port; Mvr Helper Address; Displaying Mvr Configuration - SMC Networks 7824M/VSW - annexe 1 Manual

Extended ethernet switch
Hide thumbs Also See for 7824M/VSW - annexe 1:
Table of Contents

Advertisement

CLI
9.2.6.3
9.2.6.4
9.2.6.5
370

Source/Receiver Port

You need to specify the source and receiver ports for MVR. The followings are the defini-
tions for the ports.
Source Port
This is connected to multicast routers or sources as an uplink port, which receives
and sends the multicast traffic. Subscribers cannot be directly connected to source
ports. All source ports belong to the multicast VLAN as tagged.
Receiver Port
This is directly connected to subscribers as a subscriber port, which should only re-
ceive the multicast traffic. All receiver ports must belong to the both subscriber and
multicast VLANs as untagged for implementation reasons.
To specify a port as the source or receiver port, use the following command.
Command
mvr port PORTS type { receiver |
source }
no mvr port PORTS

MVR Helper Address

When being in a different network from an MVR group's, a multicast router sends the mul-
ticast traffic to each MVR group. In such an environment, when an IGMP packet from a
subscriber is transmitted to the multicast router via the MVR group (multicast VLAN inter-
face), the source address of the IGMP packet may not match the network address of the
MVR group. In this case, the multicast router normally discards the IGMP packet. To
avoid this behavior, you can configure the switch to replace the source address with a
specified helper address. The helper address must belong to the MVR group's network.
To specify an MVR helper address to replace a source address of an IGMP packet, use
the following command.
Command
mvr vlan VLAN helper A.B.C.D
no mvr vlan VLAN helper

Displaying MVR Configuration

To display an MVR configuration, use the following command.
Command
show mvr
show mvr port
show mvr vlan VLANS
Mode
Specifies an MVR port.
PORTS: port number
Global
Deletes a specified MVR port.
Mode
Specifies an MVR helper address.
VLAN: VLAN ID (1-4094)
Global
A.B.C.D: helper address
Deletes a specified MVR helper address.
Mode
Enable
Shows an MVR configuration.
Global
Management Guide
TigerAccess™ EE
Description
Description
Description
SMC7824M/VSW

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tigeraccess smc7824m/vsw

Table of Contents