SMC Networks 7824M/VSW - annexe 1 Manual page 146

Management Guide
TigerAccess™ EE
SMC7824M/VSW
Command
snmp alarm-severity rmon-alarm-falling {criti-
cal | major | minor | warning | intermediate}
snmp alarm-severity system-restart {critical |
major | minor | warning | intermediate}
snmp alarm-severity module-remove {critical |
major | minor | warning | intermediate}
snmp alarm-severity temperature-high {critical
| major | minor | warning | intermediate}
To delete configured alarm severity, use the following command.
Command
no snmp alarm-severity fan-fail
no snmp alarm-severity cold-start
no snmp alarm-severity broadcast-over
no snmp alarm-severity cpu-load-over
no snmp alarm-severity dhcp-lease
no snmp alarm-severity dhcp-illegal
no snmp alarm-severity fan-remove
no snmp alarm-severity ipconflict
no snmp alarm-severity memory-over
no snmp alarm-severity mfgd-block
no snmp alarm-severity port-link-down
no snmp alarm-severity port-remove
no snmp alarm-severity port-thread-over
no snmp alarm-severity power-fail
no snmp alarm-severity power-remove
no snmp alarm-severity rmon-alarm-rising
no snmp alarm-severity rmon-alarm-falling
no snmp alarm-severity system-restart
no snmp alarm-severity module-remove
no snmp alarm-severity temperature-high
Mode Description
Sets severity of an alarm for RMON
alarm falling.
Sets severity of an alarm for system
restart.
Global
Sets severity of an alarm for module
removed.
Sets severity of an alarm for system
temperature high.
Mode Description
Global Deletes configured alarm severity.
CLI
145