Initializing Authentication Status; Restoring Default Value; Displaying 802.1X Configuration; User Authentication Statistics - SMC Networks 7824M/VSW - annexe 1 Manual

CLI
4.5.3
4.5.4
4.5.5
4.5.6
64

Initializing Authentication Status

The user can initialize the entire configuration on the port. Once the port is initialized, the
supplicants accessing to the port should be re-authenticated.
Command
dot1x initialize PORTS

Restoring Default Value

To restore the default value of the 802.1x configuration, use the following command.
Command
dot1x default PORTS

Displaying 802.1x Configuration

To display 802.1x configuration, use the following command.
Command
show dot1x
show dot1x PORTS
802.1x User Authentication Statistics
It is possible for user to make reset state by showing and deleting the statistics of 802.1x
user authentication.
To display the statistics about the process of 802.1x user authentication, use the following
command.
Command
show dot1x statistics PORTS
To make reset state by deleting the statistics of 802.1x user authentication, use the fol-
lowing command.
Command
dot1x clear statistics PORTS
Mode
Global Initializes the authentication status on the port.
Mode
Global Restores the default value of the 802.1x configuration.
Mode
Enable Shows 802.1x configuration on the system.
Global
Shows 802.1x configuration on the port.
Bridge
Mode
Enable
Shows the statistics of 802.1x user authentication on
Global
the port.
Bridge
Mode
Makes reset state by deleting the statistics of 802.1x
Global
on the port.
Management Guide
TigerAccess™ EE
Description
Description
Description
Description
Description
SMC7824M/VSW