Transmit Rate - SMC Networks 7824M/VSW - annexe 1 Manual

CLI
!
5.2.3
!
68
riety of manufacturers. To enable/disable the auto-negotiation on an Ethernet port, use
the following command.
Command
port nego PORTS {on | off}
Auto-negotiation operates only on 10/100/1000Base-TX interface. You cannot enable this
function on 1000Base-X optical interface.
The following is an example of disabling the auto-negotiation on the Ethernet port 25 and
26.
SWITCH(bridge)# show port 25-26
------------------------------------------------------------------------
NO TYPE
------------------------------------------------------------------------
25 Ethernet
26 Ethernet
SWITCH(bridge)# port nego 25-26 off
SWITCH(bridge)# show port 25-26
------------------------------------------------------------------------
NO TYPE
------------------------------------------------------------------------
25 Ethernet
26 Ethernet
SWITCH(bridge)#

Transmit Rate

To set the transmit rate of an Ethernet port, use the following command.
Command
port speed PORTS {10 | 100 | 1000}
Transmit rate is configurable only on 10/100/1000Base-TX interface. You cannot set
transmit rate on 1000Base-X optical interface.
Mode
Enables/disables the auto-negotiation on a specified
Bridge
port, enter a port number. (default: on)
PVID STATUS
(ADMIN/OPER)
1 Up/Up Auto/Full/1000
1 Up/Up Auto/Full/1000
PVID STATUS
(ADMIN/OPER)
1 Up/Up Force/Full/1000
1 Up/Up Force/Full/1000
Description
MODE FLOWCTRL
Off
Off
MODE FLOWCTRL
Off
Off
Mode
Sets the transmit rate of a specified port
Bridge to 10/100/1000Mbps, enter a port num-
ber.
Management Guide
TigerAccess™ EE
INSTALLED
Y
Y
INSTALLED
Y
Y
Description
SMC7824M/VSW