Selecting IP Precedence/DSCP Priority
The switch allows you to choose between using IP Precedence or DSCP
priority. Select one of the methods or disable this feature.
Command Attributes
•
Disabled – Disables both priority services. (This is the default setting.)
•
IP Precedence – Maps layer 3/4 priorities using IP Precedence.
•
IP DSCP – Maps layer 3/4 priorities using Differentiated Services
Code Point Mapping.
Web – Click Priority, IP Precedence/DSCP Priority Status. Select
Disabled, IP Precedence or IP DSCP from the scroll-down menu.
CLI – The following example enables IP Precedence service on the
switch.
Console(config)#map ip precedence
Console(config)#
Figure 3-74 IP Precedence/DSCP Priority Status
C
S
LASS OF
ERVICE
C
ONFIGURATION
4-264
3-171