Dialing Function Description - Nortel 1120E Administration Manual

52 Configure the provisioning server

Dialing function description

Dialing plan
As most telephone users are used to dialing digits to indicate the address
of the destination, there is a need to specify the rule by which digits are
transformed into a URI. The IP Phone 1120E with SIP Firmware dialing plan
contains two sections delimited by two percent signs (%%).
Figure 7
Sample dialing plan declarations section
In the declaration section, the administrator can define the variables. The
variables must start with a dollar ($) sign, followed by a number or a
character, such as $1 or $a. There are two variables that are reserved by
system. They are as follows:
$$ : used for the collected digits if they match the pattern
$t : default timer
There must be a domain name defined and the domain name can be
represented by any variable. In
the domain name is represented by $n.
The variable definitions take the form:
Figure 8
Sample dialing plan variable definitions
For example:
$1="nortel.com"
$2="Nortel"
Copyright © 2008, Nortel Networks
.
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
Figure 6 "Sample dialing plan" (page
27 May 2008
51),