Key Number Assignments; Soft Key Label Display - Nortel 1110 Installation And Operation Manual

Nortel IP Phone 2001
Page 48 of 630

Soft key label display

Key number assignments

553-3001-368 Standard 26.00
The information area changes, according to call processing state and active
features.
The soft key label has a maximum six characters. Each soft key includes the
soft key label and an icon. When a soft key is in use, a triangle icon displays
at the beginning of the soft key label, and the label shifts one character to the
right. (If the label is six characters long, the last or rightmost character is
truncated.) If a feature is enabled, the icon state turns to On. It remains in the
on state until the feature key is pressed again. This cancels the enabled feature
and turns the icon off, returning the soft key label to its original state.
Use the More soft key to navigate through the layers of functions. If there are
only four functions assigned to the soft keys, the More key does not appear
and all four functions are displayed.
A maximum of nine functions can be assigned to the four soft-labeled, pre-
defined soft keys. Because they are pre-defined, the user cannot change the
key number assignment. Functions are assigned to the soft keys in layers in
LD 11.
The Message key is numbered 16. Key numbers 17 to 31 are the four soft key
labels below the display area. See Figure 1 on
Key numbers 17 to 31 support the features A03, A06, CFW, CHG, CPN,
PRK, PRS, RGA, RNP, SCC, SCU, SSC, SSU, and TRN. See
Appendix Appendix I:: "IP Phone soft keys" on
these features.
Key number assignments at the Call Server are aligned with that of the
IP Phone 2002. The mappings between IP Phone 2001 soft key numbers and
PBX CPU key numbers are the same as on the IP Phone 2002 and IP Phone
2004.
August 2007
page 41.
page 619 for a description of