Cleaning Adf Glass/Document Glass - Muratec MFX-2830 Operation Manual

In This
Case...

Cleaning ADF glass/Document glass

Dirty ADF glass will cause a black line or other unwanted markings printed in copies or the re-
ceived document by receiving party. To maintain high picture quality, clean the ADF glass and
document glass at least once a month.
Important
Do not use benzene or thinner as cleaning agents which could damage plastic and paint.
In this case
Dirt is heavy...
When the dirt on the surfaces is heavy, wipe them with a cloth dipped in a small quantity of a mild cleaning solution,
and then wipe them again with a cloth dipped in water and thoroughly wrung out.
5-20
In This Case... Maintenance and Troubleshooting
●
1
Open the platen cover.
2
Dip a soft cloth in a bit of water
and wring it out thoroughly be-
fore wiping the ADF glass and
document glass.
3
Close the platen cover.
ADF glass
Document glass