Safety Precautions; Precautions For Safe Use - Omron E3X-DAC-S Manual

Nomenclature
Fiber Amplifier Units
Standard Models
E3X-DAC@-S (@: 11/41/6/8)
Main Display (red)
Incident level, function, etc.
Lock lever
Locks the fiber unit.
Operation Indicator
(orange)
I Mode Indicator
ON when output is ON. Lit orange: Operation
OFF when output is OFF.
in I Mode.

Safety Precautions

Refer to Warranty and Limitations of Liability.
This product is not designed or rated for
ensuring safety of persons either directly or
indirectly.
Do not use it for such purposes.
Do not use the product with voltage in excess
of the rated voltage. Excess voltage may result
in malfunction or fire.
Never use the product with an AC power
supply.
Otherwise, explosion may result.
High-temperature environments may result in
burn injury.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Operation Keys
Sub-display (green)
Function setting operations
Threshold, function settings, etc.
UP
DOWN
MODE
Operation Selector Switch
Use to switch between Light ON
and Dark ON modes.
Mode Selector
Switch
Use to select SET
or RUN mode.
WARNING
CAUTION
Advanced models with simultaneous 2-color determination
E3X-DAC@-S (@: 21/51)
Advanced models with 4-color determination
E3X-DAC@B-S (@: 21/51)
Sub-display (green)
Main Display (red)
Threshold, function settings, etc.
Incident level, function, etc.
Lock lever
Locks the fiber unit.
Ch1 Operation Indicator
ON when output is ON. Ch2 Operation Indicator
OFF when output is OFF.
ON when output is ON.
OFF when output is OFF.

Precautions for Safe Use

The following precautions must be observed to ensure safe
operation of the Sensor.
1. Do not use the Sensor in an environment where explosive
or flammable gas is present.
2. Do not use the Sensor in a location subject to splattering
of water, oils, or chemicals.
3. Do not attempt to disassemble, repair, or modify the
Sensor.
4. Do not apply voltages or currents that exceed the rated
range to the Sensor.
5. Do not use the Sensor in an ambient atmosphere or
environment that exceeds the ratings.
6. Wire the power supply correctly, including the polarity.
7. Connect the load correctly.
8. Do not short-circuit the load at both ends.
9. Do not use the Sensor if the case is damaged.
10. Dispose of the Sensor as industrial waste.
11. Do not use the Sensor in locations subject to direct
sunlight.
12. Burn injury may occur. The Sensor surface temperature
rises depending on application conditions, such as the
ambient temperature and the power supply voltage. Use
caution when operating or performing maintenance on the
Sensor.
E3X-DAC-S
Operation Keys
Function setting operations
UP
DOWN
MODE
Channel Switch
Used to select the channel to
display and set.
Mode Selector Switch
Use to select SET
or RUN mode.
10