Displaying Unit Identity - Paradyne 3150 Operator's Manual

Displaying Unit Identity

The identity of the CSU (serial number, model number,
software revision level, hardware revision level, and
customer identification) is available through the Status
branch of the front panel menu (see Appendix A,
Panel Menu).
The customer identification is the only identity number
you can change.
To display the CSU's identity (ID),
1. From the top-level menu screen, select Stat.
CSU ESF
Stat
F1
2. From the Status screen, press the
ID selection appears on the screen.
3. Select ID.
Status:
TStat
F1
3150-A2-GB21-80
Front
Test Cnfig
F3
F2
key until the
LED ID
F3
F2
February 1998
4. The following screens appear in the order listed
each time you press the
Identity:
Ser= xxxxxxx
F1
Identity:
Mod= xxxx - xx - xxx
F1
Identity:
Cust ID= xxxxxxxx
F1
Identity:
SRev= xx . xx . xx
F1
Identity:
CCA= xxxx - xxx
F1
Operation
key.
F3
F2
F2 F3
F2 F3
F2 F3
F3
F2
3-7