Mib Ii (Rfc) - Paradyne 3150 Operator's Manual

ACCULINK 315x CSU
MIB II (RFC 1213)
The objects defined by MIB II are organized into 10
different groups. The CSU implements only those groups
where the semantics of the group are applicable to the
implementation of a CSU. The MIB II object groups
supported or not supported by the 3100 Series devices are
as follows:
System Group Supported.
Interface Supported for the network
Group interface, the DTE interface, the
COM port, the AUX port, and the
MODEM port. Interface statistics
(counters) apply to any port (COM,
AUX, or MODEM), whichever is
defined as the SNMP management
link.
Address Not supported since this group is
Translation not supported in MIB II.
Group
IP Group Supported.
ICMP Group Supported.
TCP Group Supported.
UDP Group Supported.
EGP Group Not supported since the EGP
protocol is not supported by the
CSU.
Transmission Supported on the T1 interfaces
Group using the DS1/E1 MIB. Supported
on the COM, AUX, and MODEM
ports using the RS-232-like MIB.
SNMP Group Supported.
System Group, MIB II
The System Group objects are fully supported by the
CSU. The following sections provide clarification for
objects contained in the System Group where it is not
otherwise clear how the object definition in MIB II is
related to the CSU. Objects not mentioned are supported
as stated in the MIB.
System Group – "sysDescr" Object (system 1)
This object provides the full name and version
identification for the system hardware and software. This
object displays the following string:
E-2
[Company Name] T1 CSU; model xxxx-xx-xxx;
S/W Release: yy.yy.yy; H/W CCA: zzzz-zzz;
Serial number ssssssss.
Where: xxxx-xx-xxx represents the full model
number of the unit.
yy.yy.yy represents the software revision
number of the unit.
zzzz-zzz represents the hardware revision
number of the unit.
ssssssss represents the serial number of
the unit.
System Group – "sysObjectID" Object
(system 2)
This object provides the authoritative identification of
the network management subsystem contained in the unit.
This object displays the following object identifier:
3150
3151
System group –"sysContact" Object (system 4)
This object provides a textual identification of the
contact person for this managed node.
System Group – "sysName" Object (system 5)
This object provides an administratively-assigned
name for this managed node.
System Group – "sysLocation" Object
(system 6)
This object provides the physical location of this node.
System Group – "sysServices" Object
(system 7)
This object provides a value which indicates the set of
services that are potentially offered by the CSU. Only the
following values are supported by the CSU.
physical(1) – Layer 1 functionality for all
interfaces.
February 1998
[Company OID].1.14.2.1.1
[Company OID].1.14.2.1.2
3150-A2-GB21-80