Setting Customer Identification; Displaying Led Conditions - Paradyne 3150 Operator's Manual

ACCULINK 315x CSU
Setting Customer
Identification
The customer identification is the only identity number
you can change. It is used to uniquely identify the CSU.
NOTE
The following procedure is an
example only. Screen displays
may vary depending on the
model of the CSU.
To change the customer identification (CID),
1. From the top-level menu, press the
the Ctrl selection appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the
the CID selection appears on the screen.
4. Select CID.
Control:
Reset
F1
5. Use the and
under the desired character. You must enter a
character before the
next space to the right.
CustID: xxxxxxxx
Up
F1
6. Enter the desired ID. Press F1 (Up) and F2
(Down) to scroll up and down through the valid
characters/numbers for the customer ID. Valid
characters are 0 through 9, #, -, ., /, A to Z, and
blank space. Press F3 (Save) to save the ID.
3-8
key until
key until
CID Passwd
F2 F3
keys to position the cursor
moves the cursor to the
Down Save
F3
F2
February 1998

Displaying LED Conditions

The same conditions monitored by the front panel
LEDs can also be monitored by the LED command. This
command is most useful when the CSU is being accessed
remotely (see Appendix G,
When using Front Panel Emulation, no LEDs are shown
on the PC's screen; you must use the Stat command
procedure described below to get LED information.
To display LED conditions on the front panel screen,
1. From the top-level menu screen, select Stat.
2. From the Status screen, press the
LED selection appears on the screen.
3. From the Status screen, select LED.
Status:
Perf
F1
The LED Display screen lists the LED signals,
two at a time, on the second line. A vertical bar at
the left of the LED name indicates the condition is
ON, while an underscore indicates the condition is
Off.
LED Display:
_Test
F1
4. Use the and
onto the screen.
Front Panel Emulation).
key until the
TStat LED
F2 F3
_NetSig
F2 F3
keys to scroll LED names
3150-A2-GB21-80