Paradyne 3150 Operator's Manual page 165

ACCULINK 315x CSU
O
objects, SNMP, 1-2, E-1–E-16
OOF (Out Of Frame) condition
ASCII terminal/printer message, 4-8
Device Health and Status message, 4-3
front panel LED indication, 3-5, 3-6
Performance Report message, 4-6
troubleshooting, 4-10
options, strap. See configuration options
P
part numbers, I-1
pattern tests, 4-18–4-19
payload loopback (PLB), 4-16
PBX applications, 2-1
PDV (Pulse Density Violation) condition, 3-6
Perf (Performance Report) branch
example of use, 4-4–4-5
in the menu tree, A-1
performance reporting, 4-4–4-7
physical description of CSU, 1-3–1-5
physical description of DSU/CSU, B-2
pin assignments, D-1–D-10
Point-to-Point Protocol (PPP)
procedure for configuring, 3-13
used with SNMP system, 1-2, 2-2, 2-3, 3-11, F-1
power input
cabling example, 2-7
connector, 1-4, D-9–D-10
consumption, B-1
optional power sources, 2-4–2-6, B-1, D-9–D-10
requirement, B-1
troubleshooting, 4-10
power module, 1-4, B-1
power-up self-test
displaying results, 4-2
front panel indications, 2-8, 3-5
troubleshooting, 4-10
problem determination. See troubleshooting
protocol, link layer, 3-11, 3-13–3-14
Ptrns (Test Patterns) branch
example of use, 4-18–4-19
in the menu tree, A-1
Q
QRSS Test, 4-18
R
rate
auxiliary port, C-14
communications port, C-11
rear panel
connectors. See connectors, rear panel
physical description, 1-4–1-6
Index-4
Rel (Release) branch
example of use, 3-20
in the menu tree, A-1
remote loopback, 4-14
repeater loopback (RLB), 4-17
reset
front panel indications, 2-8
procedure, 3-27
Reset branch
example of use, 3-27
in the menu tree, A-1
Rlpbk (Remote Loopback) branch
example of use, 4-14
in the menu tree, A-1
S
self-test
displaying results, 4-2
front panel indications, 2-8, 3-5
troubleshooting, 4-10
Send AIS configuration option, C-2
serial crossover cable, D-8
Serial Line Internet Protocol (SLIP)
procedure for configuring, 3-13
used with SNMP system, 1-2, 2-2, 3-11, F-1
SES (Severely Errored Seconds) report, 4-6
Shared Diagnostic Control Panel (SDCP)
acquiring/releasing the user interface, 3-19–3-20
physical description, 3-2
SNMP (Simple Network Management Protocol)
agent, 1-2
configuration options
examples of use, 3-11–3-15, 3-16–3-17
menu tree branches, A-1
option table, C-18–C-25
option worksheet, C-28
connection examples, 2-2–2-3, 2-7, F-1–F-6
database, 1-2
IP addressing, F-1–F-6
manager, 1-2
MIBs
functional description, E-1–E-2
list of objects, E-1–E-16
procedure for configuring access, 3-14–3-15
objects, 1-2
principles of operation, 1-2
SNMP Down message, 4-4, 4-11
traps
functional description, 1-2, 4-9
procedure for configuring, 3-16–3-17
specifications, environmental, B-1, B-2
Stat (Status) branch
examples of use, 3-7, 3-8, 4-2, 4-3, 4-4, 4-21
in the menu tree, A-1
status messages. See messages, status
STest (Self-Test Health) branch
example of use, 4-2
in the menu tree, A-1
StEvnt (Status Event) report, 4-7
straps. See configuration options
subnet, 3-11, C-20, C-22, F-2
February 1998 3150-A2-GB21-80