Paradyne 3150 Operator's Manual page 123

ACCULINK 315x CSU
General Port Table – "rs232PortOutSpeed"
Object (rs232PortEntry 6)
This object contains the port's output speed in bits per
second. For the CSU, the rs232PortInSpeed object has the
same value as the rs232PortOutSpeed object. The input
speed of the MODEM, AUX or COM port is the currently
configured speed. Setting of this value for the MODEM,
AUX, or COM port causes the configured port speed to be
changed.
Asynchronous Port Table, RS-232-like MIB
The asynchronous port table contains an entry for the
MODEM, AUX, or COM port when the port is configured
for asynchronous operation. For the CSU, the entries in
the table that are counters (rs232AsyncPortEntry 6–8) are
used to collect statistics and are not supported.
Asynchronous Port Table, "rs232AsyncPortBits"
(rs232AsyncPortEntry 2)
This object specifies the number of bits in a character.
Only the following values are supported by the CSU.
7 – 7-bit characters. Supported on the COM and
MODEM ports only.
8 – 8-bit characters.
Asynchronous Port Table,
"rs232AsyncPortStopBits"
(rs232AsyncPortEntry 3)
This object specifies the number of stop bits supported.
Only the following values are supported by the CSU.
one(1) – One stop bit.
two(2) – Two stop bits. Supported on the COM and
MODEM ports only.
one-and-half(3) – One and a half stop bits.
Supported on the COM port only.
E-12
Asynchronous Port Table,
"rs232AsyncPortParity"
(rs232AsyncPortEntry 4)
This object specifies the parity used by the port. Only
the following values are supported by the CSU.
none(1) – No parity bit.
odd(2) – Odd parity. Supported on the COM and
MODEM ports only.
even(3) – Even parity. Supported on the COM and
MODEM ports only.
Asynchronous Port Table,
"rs232AsyncPortAutoBaud"
(rs232AsyncPortEntry 5)
This object specifies the ability to automatically sense
the input speed of the port. Only the following value is
supported by the CSU.
disabled(2) – Autobaud is not supported.
Synchronous Port Table, RS-232-like MIB
The synchronous port table contains an entry for the
MODEM or COM port when the port is configured for
synchronous operation. For the CSU, the entries in the
table that are counters (rs232SyncPortEntry 3–7) are used
to collect statistics and are not supported.
Synchronous Port Table –
"rs232SyncPortClockSource"
(rs232SyncPortEntry 2)
This object specifies the clock source for the port. Only
the following values are supported by the CSU.
internal(1) – The port uses an internal clock.
external(2) – The port uses an external clock.
February 1998 3150-A2-GB21-80