Enterprise Mib; Correlation Between Menu Commands And Snmp Objects - Paradyne 3150 Operator's Manual

ACCULINK 315x CSU

Enterprise MIB

The variable devConfigAreaCopy under the
devConfigArea group in the common area of the
Enterprise MIB will be fully supported. This variable
allows the entire contents of one configuration area to be
copied into another configuration area.
Front Panel Command
Stat–>DevHS:
LOS at NET
OOF at NET
Yellow at NET
AIS at NET
EER at NET
Stat–>DevHS:
LOS at DTE
OOF at DTE
Yellow at DTE
AIS at DTE
Stat–>Perf–>Telco–>Cur:
CurTimer
ES
UAS
SES
BES
Stat–>Perf–>Telco–>Intvl–>Dsply:
ES
UAS
SES
BES
VldIntvl
Stat–>Perf–>Telco–>24Tot:
VldIntvl
ES
UAS
SES
BES
E-14
Table E-1
SNMP MIB to Front Panel Command Cross-Reference
Read the dsx1LineStatus object for NET T1
dsx1LossOfSignal
dsx1LossOfFrame
dsx1RcvFarEnd
dsx1RcvAIS
dsx1OtherFailure
Read the dsx1LineStatus object for DTE T1
dsx1LossOfSignal
dsx1LossOfFrame
dsx1RcvFarEnd
dsx1RcvAIS
Read the value in the following objects for NET T1
dsx1TimeElapsed
dsx1CurrentES
dsx1CurrentUAS
dsx1CurrentSES
dsx1CurrentBES
Select the interval number with dsx1IntervalNumber. Read the value
in the following objects for NET T1
dsx1IntervalES
dsx1IntervalUAS
dsx1IntervalSES
dsx1IntervalBES
dsx1ValidIntervals
Read the value in the following objects for NET T1
dsx1ValidIntervals
dsx1TotalES
dsx1TotalUAS
dsx1TotalSES
dsx1TotalBES
February 1998
Correlation between Menu
Commands and SNMP Objects
Table E-1 provides a correlation between how a
function is performed or status is displayed on the front
panel and how the same function is accomplished using
access to the SNMP database. SNMP objects are
displayed in bold type while values for SNMP objects are
displayed in italics.
(1 of 3)
SNMP MIB Object
3150-A2-GB21-80