Paradyne 3150 Operator's Manual page 81

User Interface
Configuration Options
Self-Test: Enab
Next Enab Disab Prev
Initial Self-Test. Specifies whether the CSU performs a device self-test at power-up and after a device reset.
Enab – Enables a self-test.
Disab – Disables the self-test.
FP Access: Enab
Next Enab Disab Prev
Front Panel Access. Determines whether front panel access or display is allowed at the CSU.
Enab – Allows the front panel to access and display data.
Disab – Prevents the access and display of data.
NOTE: This configuration option is available on standalone CSUs only.
FP Pass: Disab
Next Enab Disab Prev
Front Panel Pass-Through. Allows dial-out access to a remote CSU using the front panel pass-through operation.
Enab – Allows dial-out access to a remote CSU.
Disab – Prevents dial-out access to a remote CSU.
NOTE: This configuration option is available on standalone CSUs only.
Dial-In: Enab
Next Enab Disab Prev
Dial-in Access. Allows dial-in access to the CSU. For standalone CSUs, dial-in access is through the modem port. For
carrier-mounted CSUs, dial-in access is through an external device that is connected to the communication port.
Enab – Allows dial-in access to the CSU.
Disab – Prevents dial-in access. Incoming calls to the CSU are not answered.
NOTE: To enable Dial-In for carrier-mounted CSUs, the external device must be configured for automatic answer and
the ComExtDev configuration option must be enabled.
3150-A2-GB21-80
Table C-4
(1 of 8)
User Interface Configuration Options
February 1998
NOTE
A circular symbol ( ) identifies
configuration options that are
available on standalone CSUs
only. A triangular symbol ( )
identifies configuration options
that are available on
carrier-mounted CSUs only.
Configuration Options
C-7