SMC Networks EXW1-BENAC1 Operation Manual page 45

* Input size / Output size setting
In protocol V.2.0, it is possible to configure remotes (such as EXW1-RL*PA*C) with variable
input/output occupied bytes.* Refer to the "I/O Map" section in the Operation Manual for each product
for the range of Input/Output size to be set.
The Remote that is to be registered on the specified wireless channel moves to the Registered
Remotes area. Make sure that the registration status is Registered Wait, and click [Save reg. info.].
￥
Base setting screen
-44-
￥
No.EX##-OMV0017-G