SMC Networks EXW1-BENAC1 Operation Manual page 119

- Compact Wireless Base unit (EXW1-BECAC) setting parameters
Classification Parameter name
a) I/O mapping
Diagnostic
b)
allocation
Max. Remote
c)
units
Time of
System Wireless
d)
setting communication
timeout
Power
e) Transmission
Level
f) Wireless signal
g) Protocol
a) Pairing
Remote
Remote b)
registration
registration
c) Dummy Remote
Set value
Auto
None / Simple / Advanced
15 / 31 / 63 Remotes
100/200/500/1,000/2,000/5,000
msec
High / Middle / Low
Active / Idle
V.1.0 / V.2.0
Normal / pairing modes
Allocation and registration of the
Wireless Remote unit to the
wireless channel.
Addition of dummy Remote to
the wireless channel
-118-
Setting
Initial when
value power is
off
Auto Available Fixed at "Auto".
Diagnostic information is allocated
Advanced Available to the head of the input data of the
I/O map.
15 Wireless channels for the number of
Available
Remotes the set units are enabled.
500 msec Available
High Available
If set to "Idle", the wireless
Active Available
communication is disconnected.
V.2.0 Available
Normal
Available
mode
Remote
Not
not
available
registered
Dummy
Not Refer to dummy Remote
Remote
available registration for setting details .
unset
Note
No.EX##-OMV0017-G