SMC Networks EXW1-BENAC1 Operation Manual page 21

 Operational flow when changing settings
A rough operational flow during setting changing operations is shown below (operations performed in
Administrator mode).
(1) Select the tab that you wish to check
(2) Display the setting item that you wish to check
(3) Click [Refresh]
(4) Check the present settings and values
(5) Change the necessary item and value settings
(6) Click [Save all]
(7) Click [Reset module] (Settings are applied to the unit)
(8) Click [Refresh]
(9) Check that the updated settings and values are applied correctly
-20-
No.EX##-OMV0017-G