Table of Contents
Advertisement
C h a p t e r 4 : Y o u r M a t r o x I r i s E - S e r i e s w i t h o u t D H C P
9. Click on the Restart OS button. A warning is displayed. Click on the OK button.
1. Open Microsoft Internet Explorer and go to the following address:
2. Click on the Administration link. The Administration page is displayed.
3. Click on the Administration utility link. The Administration utility page is
4. Click on the TCP/IP link. The TCP/IP settings page is displayed.
5. Enter the subnet mask of your computer in the Default subnet mask for Auto IP
6. Enter your computer's subnet in the Default subnet for Auto IP field.
7. Click on the Update TCP/IP settings button. The web page will refresh. At the
8. Click on the Restart OS button. A warning is displayed. Click on the OK button.
When your Matrox Iris E-Series restarts, its IP address and subnet mask should
now be the specified IP address and subnet mask.
M o d i f y y o u r A u t o I P s e t t i n g s
To change the subnet from which Auto IP selects the IP address of your Matrox
Iris E-Series, perform the following:
http://IrisName
The Matrox Iris portal website is displayed.
displayed.
field.
top of the page, the operation results are displayed. If successful, there should be
a link to the Restart operating system page. Follow that link. The Restart
operating system page is displayed.
When your Matrox Iris E-Series restarts, its IP address should now be in the
specified subnet.
Advertisement
Table of Contents
