Matrox Design Assistant Licensing - Matrox Iris E Series Installation And Technical Reference

C h a p t e r 2 : I n s t a l l i n g M a t r o x D e s i g n A s s i s t a n t
1. Open Microsoft Internet Explorer and go to the following address:
2. Select the Administration link. The Administration page is displayed.
3. Select the MIL licensing settings link. The MIL licensing settings page is
4. Select all the required packages that are disabled (for example, the Model Finder
5. Click on the Generate button. A lock code will appear in the Lock code edit field.
M a t r o x D e s i g n A s s i s t a n t l i c e n s i n g
Your Matrox Iris E-Series smart camera comes with a permanent license for most
Matrox Design Assistant packages, (for example, Code reader, Edge locator,
Metrology, Intensity checker, and Calibration). Others, like the Model Finder
package, are not included in the permanent license. Instead, they come with a
temporary 30-day license. To extend this license, you must purchase the package
through the MIL license settings web page on your Matrox Iris E-Series.
The MIL licensing settings web page, accessible from the Assignment settings
page of the Matrox Iris portal website, provides a list of available packages and
whether they have been purchased (enabled) or not (disabled).
To purchase a package, perform the following:
http://Auto_Net_Name. Replace Auto_Net_Name with the name of your Matrox
Iris E-Series (written on the sticker on the bottom of your smart camera, for
example: http://Iris2203E0). The Matrox Iris portal website is displayed.
displayed.
package is not enabled).