A p p e n d i x G : U s i n g t h e I / O s i g n a l s o f M a t r o x I r i s E - S e r i e s
C o n n e c t i n g t o a n e x t e r n a l t r i g g e r i n g d e v i c e
To connect your Matrox Iris E-Series to an external triggering device, the ground
of your Matrox Iris E-Series must be connected directly to the external triggering
device's ground, while the input signal connects directly to the output of the
external triggering device. Your Matrox Iris E-Series takes the output signal of the
external triggering device as its input.
You can create a MIL application that will accept the trigger signal and grab an
image, either on the signal's rising or falling edge. Refer to the MIL User Guide
for more information on creating a MIL application.
13
24
20
IND_USER/TRIG_IN0
7
IND_USER/TRIG_IN1
14
1
Matrox Iris
input and
GND
output
connector
Trigger generator
(up to 24 V)
Out 0
or
Out 1
GND