Chapter 2 : I N S T A L L I N G M A T R O X D E S I G N A S S I S T A N; Minimum Requirements; Matrox Iris E-Series Requirements; Matrox Design Assistant's Installation Requirements - Matrox Iris E Series Installation And Technical Reference

C h a p t e r 2 : I n s t a l l i n g M a t r o x D e s i g n A s s i s t a n t
• Matrox Design Assistant, version 1.0 or greater.
• A 10/100 Mbit ethernet board (installed in your computer) with an RJ-45 jack,
• Either a 10/100 Mbit straight-through ethernet cable (if connecting to a LAN)
• Microsoft Windows XP with service pack 2 or above, or Microsoft Vista.
• A DVD reader.
• Up to 310 Mbytes of free hard disk space to install Matrox Design Assistant.
• Microsoft Internet Explorer version 7 or above.
• Administrator privileges on your computer.
• A suitable display board that is compatible with DirectX 9 (Pixel Shader 1.4 or
M i n i m u m r e q u i r e m e n t s
This section lists the minimum requirements for your computer so that you can
use your Matrox Iris E-Series, install Matrox Design Assistant, and use the Matrox
Iris portal website.
M a t r o x I r i s E - S e r i e s r e q u i r e m e n t s
The following lists the minimum requirements to use your Matrox Iris E-Series
smart camera:
installed and functioning ethernet drivers, and a configured TCP/IP
communication network protocol.
or a cross-over cable (if directly connecting your Matrox Iris E-Series smart camera
to your computer).
M a t r o x D e s i g n A s s i s t a n t ' s i n s t a l l a t i o n r e q u i r e m e n t s
The following lists the minimum requirements to use Matrox Design Assistant
on your computer.
Note that less space might be required if Microsoft .NET 1.0 and 2.0 Framework
files are already installed on your system.
higher) is recommended.