Table of Contents
Advertisement
S e t a s t a t i c I P a d d r e s s a n d s u b n e t m a s k
When you disable Auto IP and DHCP, you must also provide a static IP address
and static subnet mask for your Matrox Iris E-Series.The static IP address and
subnet mask must be on the same subnet as your LAN. Contact your LAN
administrator to learn what IP address and/or subnet your Matrox Iris E-Series
should use.
To configure your Matrox Iris E-Series, perform the following:
1. Open Microsoft Internet Explorer and go to the following address:
http://IrisName
The Matrox Iris portal website is displayed.
2. Click on the Administration link. The Administration page is displayed.
3. Click on the Administration utility link. The Administration utility page is
displayed.
4. Click on the TCP/IP link. The TCP/IP settings page is displayed.
5. Disable the Enable usage of DHCP option.
6. Enter your static IP address and static IP subnet mask in the spaces provided.
Note that the static IP address of your Matrox Iris E-Series must be in the same
❖
subnet as used by your computer, otherwise you will not be able to
communicate with your Matrox Iris E-Series. Also, the IP address must be
unique on your network.
7. Disable the Enable usage of Auto IP option.
8. Click on the Update TCP/IP settings button. The web page will refresh. At the
top of the page, the operation results are displayed. If successful, there should be
a link to the Restart operating system page. Follow that link. The Restart
operating system page is displayed.
C o n f i g u r e y o u r M a t r o x I r i s E - S e r i e s s u b n e t a d d r e s s
5 1
Advertisement
Table of Contents
