Ip Addresses - Matrox Iris GT Installation And Technical Reference

C o n f i g u r i n g y o u r M a t r o x I r i s G T t o w o r k w i t h a n e t w o r k t h a t u s e s s t a t i c I P a d d r e s s e s
C o n f i g u r i n g y o u r M a t r o x I r i s G T t o w o r k w i t h
a n e t w o r k t h a t u s e s s t a t i c I P a d d r e s s e s
To add your Matrox Iris GT to a network using static IP addresses, perform the
following:
1. Contact your network administrator for a unique IP address for your Matrox
Iris GT and to determine the subnet mask for your network. Most networks have
IP addresses all on the same subnet.
2. Disconnect your computer from your network.
3. Plug your Matrox Iris GT 100/1000 BaseT cable directly to your computer.
4. On your computer, launch the Matrox IrisBootParams utility. From the Matrox
Imaging submenu of the Windows Start menu, select Design Assistant for Iris
GT. From the presented submenu, select Tools, and then click on Iris Network
and Boot Settings.
3 3