Table of Contents
Advertisement
4. Verify that the following settings under the ActiveX controls and plug-ins element
are either set to enabled or enabled on prompt:
- Download signed ActiveX controls.
- Initialize and script ActiveX controls not marked as safe.
- Run AcitveX controls and plug-ins.
- Script ActiveX controls marked safe for scripting.
Note that, if these settings are set to prompt, you will be prompted each time
❖
an ActiveX control requires downloading and is waiting to start. You must
accept each prompt (click on OK) to allow Matrox Iris E-Series to use the
ActiveX object.
5. Click on the OK button.
6. On the Security tab, select Trusted sites and click on the Sites button. The Trusted
sites dialog opens.
7. Enter the Iris Name for your Matrox Iris E-Series smart camera in the field
provided, and click on the Add button.
8. Then, click on the Close button to close the Trusted sites dialog box. Click on
the OK button to close the Security tab.
1. This setting is required by the Matrox Discovery utility on the Matrox Iris portal web-
site, but not the Matrox Discovery utility on your computer.
M a t r o x I r i s p o r t a l w e b s i t e
1
3 5
Advertisement
Table of Contents
