Rods For Agitator Shaft - LEMKEN Saphir 7-B AutoLoad Operating Instructions Manual

17 RODS FOR AGITATOR SHAFT

For extreme awney and light
grass seed a grass seed agitator
device (additional equipment) can
be necessary, in order to avoid
bridging.
Therefore additional rods (19) are
fitted to the agitator shaft (52) insi-
de the hopper by means of clamps.
Fit rods so that they do not touch the discharge wedges provided below.
The rods must be removed again, as soon as other seed should be used, as
the they can infuence the seed rate.
63