Stirring Rods For The Agitator Shaft - LEMKEN Saphir 8 AutoLoad Operating Instructions Manual

10

STIRRING RODS FOR THE AGITATOR SHAFT

Mount the stirring rods so that they do not come into contact with the wedges be-
low.
The stirring rods must be removed again if you want to sow a different seed, since
they can influence the spread rate.
70
Stirring rods for the agitator shaft
In the case of particularly husky grass
seeds, it can be useful to increase the agi-
tation intensity to prevent bridging.
To enable this, additional stirring rods (1)
can be clamped to the agitator shaft (2) in
the seed box.