LEMKEN Saphir 7-B AutoLoad Operating Instructions Manual page 60

Remove seed wheels e.g. Mono
Plus and fit new seed wheels e.g.
Conti Plus. Where switchable
seed wheels are fitted, fit
switchable seed wheels again.
All seed wheels (6) must be fitted
identically, that means that the
gaps (10) or other stricking points
of the seed wheels are on one
line.
Push in seeding shaft (5) again, fit
linch pin (1) and dismount grip (2).
In the area of the bearing (9) the
bearing must be turned, so that
the seeding shaft (5) with its hexa-
gon profil can be pushed through.
Finally hook in springs (4) of the
bearing plates.
58