Adaptation Of The Seed Drill To The Used Seed - LEMKEN Saphir 7-B AutoLoad Operating Instructions Manual

ATTENTION! So not put one's hand into the hopper whilst the agitator shaft
is turning.

5.4 Adaptation of the seed drill to the used seed

For a good and even seeding result the following must be adjusted:
- Agitator shaft
- Slides
- Seed Wheels
- Grass seed agitator device (assemble before filling the hopper)
- Bottom flaps (assemble before filling the hopper)
IMPORTANT!
If it is required to seed little peas up to 150 kg/ha, it will be recommended to
use the special seed wheels Mono Plus.
If it is required to seed peas or beans in a large quantity of more than 150 kg/
ha, it will be recommended to used the seed wheels Mega Plus.
After a calibration test with unusual seed and before the seeding procedure,
it is recommended to test and check the seeding depth and therewith the im-
plement adjustments on a small test area. Due to the not influenced features
as:
- thousand grain weight,
- seed quantity,
- dressing,
- quality of seed,
- current adjustments of the implement,
- maintenance and
- structure of the seed bed
LEMKEN cannot take over responsibility for losses of output, which result
from it.
The function of the seed drill, the seeding depth quality a.s.o. must be chek-
ked before work, during work and after each changing of the field.
29