Pivot Points - LEMKEN Saphir 7-B AutoLoad Operating Instructions Manual

22.9 Pivot points

All pivot points of all coulters, harrows, drive wheel and pre-emergence mark-
ers must be greased every 25 hours. The pivot points must also be greased
with a quality grease before and after the winter interruption.
IMPORTANT: Do not clean this implement with a Pressure Washer during
the first 6 weeks. After this time a minimum nozzle distance of
60 cm must be observed with a maximum 100 bar pressure
and 50° C temperature.
• Read and adhere to the General Safety Instructions as well as
to the Instructions 'Maintenance'!
72