LEMKEN Saphir 7-B AutoLoad Operating Instructions Manual page 22

b) Coupling parts for foreign models (FR)
With this version the seed drill can
also be attached to the three-point
linkage of soil cultivation imple-
ments of other manufacturers.
Via the row of holes LR) the draw-
bar (90) can be adjusted in a dis-
tance to the seed drill as required.
This ensures a simple fitment of
the seed drill to a soil cultivation
implement.
With this version the top link must be adapted in its length and provided
with a bore for the first attachment by a specialist. When delivered the top
link shows only one bore for attaching to the seed drill.
c) Coupling parts for solo use (SO)
With this version the seed drill can
be attached directly to the tractor
three-point linkage.
ATTENTION! The tractor three point
linkage
spond to the ISO 730-
1. It must show a positi-
on control or a depth limiter, so that the seed drill can be lowe-
red to the prescribed distance „A" for work according to the
following table, without the risk to be lowered too deep.
20
must corre-