Changing Pc Communication Settings - Xante Accel-a-Writer 8200 Manual

these procedures, see your Windows documentation or the
Windows Tutorial under the Help menu in the main
Windows program.

Changing PC Communication Settings

When you install the XANTÉ XT_82001.PPD for Windows, the
communication selection is set automatically to LPT1: (parallel). To
change this to COM1: (serial) communication
1. Start your Windows application.
2. Open the Program Manager and locate the Main group.
3. Double-click the Main group icon to open that window.
4. Double-click the Control Panel icon to open that window.
5. Double-click the Printers icon to open that window (fig. 6.15).
Default Printer
Apple LaserWriter II NT on LPT1
Installed Printers
Apple LaserWriter II NT on LPT1
PostScript Printer on LPT1
VariTyper VT-600 on LPT1
Set as Default Printer
Use Print Manager
6. Click Accel-a-Writer 8200 on LPT1... to select it.
7. Click Connect... (fig. 6.15). A window displays showing the
available interfaces.
6-34 Routine Operationsbb
Printers
Fig. 6.15 The Printers Window
__________________________________
Cancel
Connect...
Setup...
Remove...
Add
Help