Trays And Stackers; Trays 1 To 5; Mp Tray; Face-Down Stacker - Xante Ilumina GL User Manual

Trays and Stackers

Trays 1 To 5

Tray 1 is the standard blank paper input tray and can hold up to 530 sheets of 20 lb.
(75 g/m²) paper. Additional trays, to give a total of fi ve, can be added to give a total
tray capacity of 2650 sheets of 20 lb. (75 g/m²) paper.
If you have identical paper stock loaded in another tray (for example Tray 2 or the
MP Tray), you can have the Ilumina automatically switch to that other tray when the
current tray runs out of paper. This function can be enabled by driver settings when
printing from a Windows application or by a menu setting when printing from other
applications.

MP Tray

The multi-purpose tray is used for media sizes in addition to those of the standard
trays, heavier media weights and special media.
The multi-purpose tray can handle the same sizes as the standard trays but in weights
up to 73 lb. (330 g/m²). For very heavy paper stock use the face-up paper stacker.
This ensures that the paper path through the Ilumina is almost straight .
The multi-purpose tray can feed paper widths as small as 3" (76.2 mm) and as wide
as 12.91", and lengths up to 47.24" (1200 mm). For banner printing, recommended
sizes are 35.43" and 47.24" long and weight up to 34 lb. (128 g/m²).
Use the multi purpose tray for printing on envelopes and transparencies. Up to 100
sheets of transparencies or 25 envelopes can be loaded at one time, subject to a
maximum stacking depth of 1 in.
Paper or transparencies should be loaded print side up and top edge into the MP
Tray of the Ilumina. Do not use the duplex (two-sided printing) function for
transparencies.

Face-Down Stacker

The face-down stacker on the top of the Ilumina can hold up to 500 sheets of
20 lb. (80 g/m²) standard paper, and can handle paper stocks from 17 – 57 lb.
(64 – 216 g/m²). Pages printed in reading order (page 1 fi rst) will be sorted in reading
order (last page on top, facing down).
22 Ilumina GL Users Guidebb