Scope Of Delivery And Options; Inverters, Frame Sizes Fsd - Siemens SINAMICS G120C Compact Operating Instructions

Scope of delivery and options

2.1 Inverters, frame sizes FSD ... FSF
The delivery comprises at least the following components:
● A ready to run inverter with loaded firmware.
Options for upgrading and downgrading the firmware can be found on the Internet:
Firmware (http://support.automation.siemens.com/WW/news/en/67364620)
You can find the article number 6SL3210-1KE..., the hardware version (e.g. C02) and the
firmware (e.g. V4.7) on the inverter rating plate.
● 1 set of shield plates, including mounting materials
● Compact Operating Instructions in German and English
● The inverter contains open-source software (OSS). The OSS license terms are saved in
the inverter.
● 1 set of covers for the motor, line and braking resistor terminals.
Transferring OSS license terms to a PC
Procedure
To transfer OSS license terms to a PC, proceed as follows:
1. Switch off the inverter power supply.
2. Insert an empty memory card into the card slot of the inverter.
3. Switch on the inverter power supply.
4. The inverter writes file "Read_OSS.ZIP" to the memory card within approximately
30 seconds.
5. Switch off the inverter power supply.
6. Withdraw the memory card from the inverter.
7. Insert the memory card into the card reader of a PC.
8. Please read the license terms.
You have transferred the OSS license terms to a PC.
SINAMICS G120C, FSD ... FSF inverters
Compact Operating Instructions, 11/2016, FW V4.7 SP6, A5E39339884B AA
Overview of the interfaces (Page 28)
2
9