X11 Lvds; X29 Sound Interface - Kontron MSM200X User Manual

4.2.4 X11 LVDS
Terminated: 100 Ohm on each differential pair
EMI-Protection: None
Pin Signal
1 LVDS_DATA0-
3 LVDS_DATA1-
5 LVDS_DATA2-
7 LVDS_DATA3-
9 GND
11 LVDS_CLK-
13 5V Output
15 LVDS_DDC_CLK
17 PCIE_RST#
19 LVDS_Backlight_Control
21 12V (VDC) Output
23 USB_D-
Detailed Signal Description
Signal Description
Output, LVDS, voltage: 1.25V±225mV
LVDS_CLK [+/-]
Channel x differential clock pair output (compliment): 245-800MHz.
Output, CMOS LVDS LCD Flat Panel Backlight Brightness Control:
LVDS_Backlight_Control This signal is used as the Pulse Width Modulated (PWM) control signal to control the backlight
inverter.
Output, CMOS LVDS LCD Flat Panel Backlight Enable:
LVDS_Backlight_Enable
This signal is used to enable the backlight inverter (BLI).
Output, CMOS LVDS LCD Flat Panel Power Control:
LVDS_VDD_Enable
This signal is used to enable power to the panel interface.
Output, LVDS, voltage: 1.25V±225mV
LVDS_DATA [0-3] +/-
Channel x differential data pair 3:0 output (true): 245-800MHz.
4.2.5 X29 Sound Interface
Pin Signal
1 Line_R
3 Line_L
5 GND (signal)
7 MIC_R
9 MIC_L
20
Pin
2
4
6
8
10
12
14
16
18
20
22
24
Pin Signal
2 GND (signal)
4 SPDIF_OUT
6 GND (digital)
8 SPDIF_IN
10 GND (digital)
MSM200X/XP/XU & SMA200 / Connectors & Jumpers
Signal
LVDS_DATA0+
LVDS_DATA1+
LVDS_DATA2+
LVDS_DATA3+
GND
LVDS_CLK+
3.3V Output
LVDS_DDC_DATA
LVDS_Backlight_Enable
LVDS_VDD_Enable
12V (VDC) Output
USB_D+
www.kontron.com