Pmc Connectors J23, J24, And J25; Pmc Interface - Kontron CP6500-V User Manual

CP6500-V
2.2.18

PMC Interface

For flexible and easy configuration one onboard PMC socket is available. The Jn1 and Jn2 and
Jn4 connectors provide the signals for the 32-bit PCI Bus. The PMC port supports 33 MHz. The
Jn3 connector is for the 64-bit CompactPCI bus and is not populated. User defined I/O signals
are supported (Jn4) and are connected to the CompactPCI rear I/O connector J4.
This interface has been designed to comply with the IEEEP1386.1 specification which defines
a PCI electrical interface for the CMC (Common Mezzanine Card) form factor. The CP6500-V
provides 3.3V and 5 V (default) PMC PCI signaling environment.
Figure 2-9:

PMC Connectors J23, J24, and J25

ID 28945, Rev. 01
1 2
J23
Jn1
63 64 63
63
© 2005 Kontron Modular Computers GmbH
Functional Description
1 2
J25
Jn2
64
1 2
J24
Jn4
64
Page 2 - 21