Abbott aim Technical & Service Manual page 65

5.3.8
PVT Data Form
Section 5, Maintenance and Service Tests
D AIM List 13038-04 CO AIM Plus List 13967-04 | Serial
No:
Performance Verification Test Value Pass | Fail | N/A
Electrical Test
Set Clock
Software Version Verification Main/Safety
Supply Check EXT AC (7.60 - 8.40V)
REG SV (4.80 - 5.20V)
Display Test
Contrast Adjust
LED Test
Keypad Test
Battery Check
Display Test ALK (4.60 - 5.16V)
LITH (2.79 - 3.50V)
Idle Current DMM (30 mA or less)
Optics Check | AIR (231 - 255)
OCCL (231 - 255)
Optics Check II AIR (14 to 40)
OCCL (12 to 40)
Clearing Memory
Beeper Test Duty Cycle (approx. 50%)
Frequency (AIM 4 kHz, AIM Plus 2.00 - 2.30 kHz)
Motor Test Dry Test or Wet Test (circle one)
DMM (210 mA or less)
1115 or less)
RPM (76.0 - 97.0)
Servo Calibration
Dry Test or Wet Test (circle one) | :
MD (50 - 75)
LR (>25)
Dry Test: ILO (200 - 450)
Wet Test: ILO (100 - 450)
Dry Test: IHi (275 - 600)
AIM/AÏM Plus Technical Service Manual
5-33 430-600035-002 (Rev. 11/99)