Abbott aim Technical & Service Manual page 3

List of
Changes
Part Number
430-600035-001
(Rev. 12/96)
430-600035-002
(Rev. 10/99)
AIM/AIM Plus Technical Service Manual i 430-600035-002 (Rev. 11/99)
Remove and
Description of Change Destroy Pages
Original issue. N/A
Second issue. All
Section 5: (1) Updated pump inspection
checklist to match current service training. (2)
Added alternate PVT procedures for
performing the motor test, servo calibration,
encoder test, and current supply test without a
torque brake. Revised PVT Data Form to add
alternate results.
Section 6: Added procedure for setting
February 29 on leap years.
Section 7: Added alternate instructions for
RTV sealing.
General: Added Seiko DPU414 as compatible
printer.
Insert
Change
Pages
N/A
All