Introduction; Scope - Abbott aim Technical & Service Manual

Po ㄴㄴ
Section 1
Introduction
11
Scope
This Technical Service Manual presents technical information about the Abbott Ambulatory
Infusion Manager (AIM™) and Abbott Ambulatory Infusion Manager Plus (AIM® Plus) infusion
pumps. It is intended for the trained technician experienced in analysis, troubleshooting and repair of
analog and digital microprocessor-based equipment.
It is organized into the following nine sections:
Section 1 Introduction
Section2 Warranty
Section 3 System Operating Manual
Section 4 Theory of Operation
Section 5 Maintenance and Service Tests
Section 6 Troubleshooting
Section 7 Replaceable Parts and Repairs
Section 8 Specifications
Section9 Drawings
Note: In this manual, the terms "pump" and "pumps" refer to all configurations of both the AIM and
AIM Plus unless otherwise specified.
Note: Figures are rendered as graphic representations to approximate the actual product; therefore,
figures may not exactly reflect the product. Display screens and touchswitch labels may vary slightly,
depending on the configuration of the pump in use.
Ifa problem in the infusion system operation cannot be resolved using the information in this manual,
contact Abbott Laboratories Technical Support Operations (see Section 6.1, Technical Assistance).
AIM/AIM Plus Technical Service Manual 1-1 430-600035-002 (Rev. 11/99)