FUTABA T10PX Full Manual page 71

2
For the F-4G system, tapped [Analog Servo] [Digital Servo] [SR mode] in the receiver
setting "Response" and make changes. SR mode require their own dedicated servos.
The display changes when the mode is changed.
When using normal servo or ESC, set the Digital servo or Analog servo.
Receiver
Tap the Ch.1(Steering )
Note:
In SR mode ON, normal servo, ESC, and standard gyro will not operate.
*
In the case of T-FHSS SR, select ON / OFF of SR mode in the response.
Turn it ON for SR.
3
When using battery fail-safe, set the Battery Fail-safe Voltage in the "Fail-safe" in the
"Linkage menu".
*In the F-4G system, the Battery Fail-safe voltage is set at the time of linking. Relink when
changing Battery Fail-safe voltage.
4
Bring the transmitter and receiver within 50 cm of each other (antennas do not touch)
and turn on the receiver power.
5
Touch [Link] on the transmitter T10PX screen, you will hear a chime sound and T10PX
will enter the link mode for 20 seconds.
LINKAGE MENU
Tap the SR mode
When using SR
servo for steering
"Please link receiver again"
is display
Tap Yes.
Restart the Receiver.
When using SR
servo for steering