FUTABA T10PX Full Manual page 36

2
In "Receiver", select and tap the
system to be set from systems.
The confirmation screen will be
displayed. To execute, tap [Yes] to
hear an electronic sound and finish
setting. To cancel, select [No] and
touch it. If you change the system,
be sure to link it with the receiver
and turn the power on again.
3
For the F-4G system, tapped [Analog Servo] [Digital Servo] [SR mode] in the receiver
setting "Response" and make changes. SR mode require their own dedicated servos.
The display changes when the mode is changed.
When using normal servo or ESC, set the Digital servo or Analog servo.
Receiver
Tap the Ch.1(Steering )
Note:
In SR mode ON, normal servo, ESC, and standard gyro will not operate.
*
In the case of T-FHSS SR, select ON / OFF of SR mode in the response.
When using SR
servo for steering
Turn it ON for SR.
Tap the system to be set from F-4G, T-
FHSS SR, T-FHSS, S-FHSS or Mini-Z.
"Please link receiver again"
Tap the SR mode
is display
Tap Yes.
* Even with the same receiver, if you change
the system, be sure to link with the receiver
and power cycle the receiver.
When using SR
servo for steering
Restart the Receiver.